GE ZVB36BN ZVB36SN/BN, GE Monogram 36 Telescopic Downdraft Vents, Electrical and Gas Locations

ZVB36SN/BN

GE Monogram® 36" Telescopic Downdraft Vents

Dimensions and Installation Information (in inches)

Electrical and Gas Locations

Plan the placement of the electrical outlet and gas (if used) carefully. Gas or electrical outlets cannot be located on the back wall of the cabinet because they may interfere with the downdraft plenum.

•Install a standard electrical outlet within reach of the vent’s two-foot-long power cord. Locate the outlet inside the cabinet on the right side wall.

•If the vent is installed in combination with a Monogram® gas cooktop, it may operate from the same 120V standard duplex outlet.

•If the vent is installed in combination with a Monogram electric cooktop, the vent must operate from a separate 120V outlet.

Do Not Locate Gas or Electrical

Connections Within Shaded Area

29-1/2"

Electrical

Outlet

12" Above Cabinet Floor

34" for 36" Models

28-1/2" for 30" Models

Venting Options

The downdraft vent is shipped with the discharge outlet pointing straight down and can be changed to a left- or right-side discharge. For even more flexibility, the entire blower and mounting plate can be adjusted 3-1/2" to the left or right sides.

For answers to your Monogram,® GE Profile™ or GE® appliance questions, visit our website at ge.com or call GE Answer Center® service, 800.626.2000.

Listed by

Underwriters

Laboratories

Specification Created 11/08 130676