GE ZVB36WH Venting Options, Electrical and Gas Locations, Do Not Locate Gas or Electrical, Outlet

Models: ZVB36SH ZVB36BH ZVB36WH

1 4
Download 4 pages 46.69 Kb
Page 3
Image 3
Venting Options

ZVB36SH/BH/WH – GE Monogram 36" Telescopic Downdraft Vents

Venting Options

The downdraft vent is shipped with the discharge outlet pointing straight down and can be changed to a left- or right-side discharge. For even more flexibility, the entire blower and mounting plate can be adjusted 3-1/2" to the left or right sides.

Discharge Down

Discharge Left

Discharge Right

(As Supplied)

Electrical and Gas Locations

Plan the placement of the electrical outlet and gas (if used) carefully. Gas or electrical outlets cannot be located on the back wall of the cabinet because they may interfere with the downdraft plenum.

Install a standard electrical outlet within reach of the vent’s two-foot-long power cord. Locate the outlet inside the cabinet on the right side wall.

If the vent is installed in combination with a Monogram® gas cooktop, it may operate from the same 120V standard duplex outlet.

If the vent is installed in combination with a Monogram electric cooktop, the vent must operate from a separate 120V outlet.

Specification Created 10/03

Do Not Locate Gas or Electrical

Connections Within Shaded Area

29-1/2"

Electrical and Gas Locations Electrical

Outlet

12" Above Cabinet Floor

Do Not Locate Gas or Electrical 34" for 36" Models Connections Within Shaded Area

28-1/2" for 30" Models

Listed by

Underwriters

RLaboratories

For answers to your Monogram,® GE Profileor GE® appliance questions, visit our website at GEAppliances.com or call GE Answer Center® service, 800.626.2000.

130656

Page 3
Image 3
GE ZVB36WH Venting Options, Electrical and Gas Locations, Do Not Locate Gas or Electrical, Outlet, Above Cabinet Floor