Temperature controls
Operating Instructions
Bottom Freezer Refrigerator
Preset Settings
Allow 24 hours to reach these preset temperatures.
The temperature display shows the actual temperature of the freezer and fresh food
compartments. The actual temperature may vary slightly from the set temperature based on factors such as frequency of door opening, amount of food, defrost cycling and room temperature.
To turn off the cooling system in both the freezer and fresh food compartments, press either + pad until both displays show OFF.
To turn the cooling system on, press either – pad. The preset temperatures of 0°F and 37°F will appear in the display.
To check the current temperature setting for
the fresh food or freezer compartment, press the + or – pad once. After 5 seconds, the display will return to the actual temperature.
To change the temperature settings, press the
+or – pads. Allow 24 hours for the refrigerator to reach the temperature you have set.
Temperature Ranges
|
| Low |
| High |
|
Fresh Food |
| 34°F |
| 45°F |
|
|
| 1°C |
| 7°C |
|
Freezer |
|
| +6°F |
| |
|
|
|
| ||
|
|
|
|
|
|
Changing display temperatures from °F to °C
Door alarm
NOTE: Setting the controls to OFF stops cooling, but does not shut off electrical power to the refrigerator.
To change the temperature display between
Fahrenheit and Celsius, press the Temp
Display °C/°F.
To turn the Door Alarm feature on, press | When the DOOR ALARM |
the pad once. The ACTIVE light will come on. | is active, the alarm will flash |
To turn it off, press the pad again. | and beep if you keep the |
| door open for more than |
| 2 minutes. |
8
