GE Monogram JBP70, JBP67, JBP66, JBP65 Power Outage, Safety, AUTOMATIC OVEN Light on some models

www.GEAppliances.com

Oven Control, Clock and Timer Features and Settings

Safety

AUTOMATIC OVEN Light (on some models)

This lights anytime the oven has been programmed using the COOKING TIME or START TIME functions.

OVEN LIGHT ON/OFF Pad

Touch this pad to turn the oven light on or off.

– Pad

Short taps to this pad will decrease the time or temperature by small amounts. Touch and hold the pad to decrease the time or temperature by larger amounts.

Indicator Lights (on some pads)

EDIT mode lasts several seconds after the last pad press. START TIME ON/OFF and COOKING TIME ON/OFF will be the only pads lit if either of these options is selected. (Example: START TIME is selected with BAKE—the START TIME pad will remain lit until the clock reaches the programmed time, at which point it will turn off and the BAKE/TEMP RECALL pad light will light up).

Instructions Operating Instructions

+ Pad

Short taps to this pad will increase the time or temperature by small amounts. Touch and hold the pad to increase the time or temperature by larger amounts.

SELF CLEAN Pad

Touch this pad to select the self-cleaning function. See the Using the self-cleaning oven section.

SELF CLEAN Light

Flashes while in edit mode—you can change the length of time for the self-clean cycle at this point. Glows when the oven is in the self- clean cycle. After the self-clean cycle, the light will turn off. Unlatch the door.

CLEAR/OFF Pad

Touch this pad to cancel ALL oven operations except the clock and timer.

BROIL HI/LO Pad

Touch this pad to select the broil function.

BROIL Light

Flashes while in edit mode—you can switch from HI to LO BROIL at this point. Glows when the oven is in broil mode.

Power Outage

If a flashing time is in the display, you have experienced a	To reset the clock, touch the CLOCK pad. Enter
power failure. Reset the clock.	the correct time of day by touching the + or –
	pads. Touch the START/ON pad.

11

Care and Cleaning Troubleshooting Tips Consumer Support