GE Monogram ZBD1850NII dimensions GE Monogram 18 Dishwasher, Opening 2 Minimum, Clearances

ZBD1850NII

GE Monogram® 18" Dishwasher

Dimensions and Installation Information (in Inches)

ADA-Compliant ZBD1850NII:Installation below 34"-high countertops

Areduced-height installation (32-1/2" min.) beneath a 34" countertop can be accomplished by removing the front leveling legs. The rear legs should be screwed in flush with the bottom support, as shipped. The front of the dishwasher must be shimmed to level it. Water and electrical must be routed through the back wall.

Electrical Requirements

The dishwasher must be supplied with 120V, 60Hz, and connected to an individual properly grounded branch circuit protected by a 15- or 20-amp circuit breaker or time-delay fuse.

For answers to your Monogram,® GE Profile™ or GE® appliance questions, visit our website at ge.com or call GE Answer Center® service, 800.626.2000.

•The dishwasher must be installed so that the drain hose is no more than 10 feet in length for proper drainage.

•The dishwasher must be fully enclosed on the top, sides and back, and must not support any part of the enclosure.

Clearances:

When installed into a corner, allow 2" min. clearance between dishwasher and adjacent cabinet,wall or other appliances. Allow 25-5/8" min. clearance from the front of the dishwasher for door opening.

Countertop

Dishwasher

25-5/8"

Clearance for Door

Opening 2" Minimum

Installation Information:

Before installing, consult installation instructions packed with product, or available at Monogram.com, for current dimensional data.

Listed by	As an Energy Star®
Underwriters	partner, GE has determined
Laboratories	that this product meets the
	Energy Star guidelines
	for energy efficiency.

Specification Created 6/08 150050