GE Monogram ZBD4700XWW-Dishwasher with stainless steel interior, Monogram, Revised 7/97

Monogram.™

ZBD4700XWW—Dishwasher with stainless steel interior

Dimensions and Specifications (in inches)

1/4" Custom Door and Access Panel Dimensions

Notch 1/8"

3/16"

1/4" Thick

Door Panel

22 11/16"

5/16"
Radius	1/4" Thick Access Panel	1 1/2"
Cut

Cut 1/4" thick door panel: 23-1/4" wide, 22-11/16" high.

Cut 1/4" thick access panel: 23-1/4" wide 1-1/2" high. Cut edges of the panels will be concealed by the trim.

Cut a notch in the top corners of the door panel. 1/8" wide and 3/16" deep. This will allow the panel to slide under the escutcheon. The bottom corners of the door panel trim and all 4 corners of the access panel trim are rounded. Therefore, for a good fit, a 5/16" radius cut is required.

23 1/4"

For answers to your GE Monogram,™ GE Profile,™

GE, Hotpoint and RCA appliance questions, call

GE Answer Center® service, 800.626.2000.

UL	Listed by
	Underwriters
R	Laboratories
Revised 7/97