GE Monogram dimensions ZCG3500DSS - GE Monogram Built-In Compactor, Additional Specifications

ZCG3500DSS – GE Monogram Built-In Compactor

Dimensions and Specifications (in inches)

34"-35"

12-1/8" min.

20-1/4"

34" min.

adj. to

22-1/2" min.*35" max.

*Add 2-1/2" to depth if outlet

is located directly behind compactor

12"

Adjustable base 2-3/4" to 4-1/4"

This Monogram compactor has a black control panel.

The adjustable base allows the toekick depth to match surrounding cabinetry. This compactor is designed as a built-in appliance only. It may be located in any convenient space under a countertop. DO NOT OPERATE FREE- STANDING because the compactor will tip over when the drawer is pulled out.

Additional Specifications

A 115 Volt, 60 Hz. power supply is required. An individual properly grounded branch circuit protected by a 15- or 20-amp circuit breaker or time delay fuse is recommended. Install a properly grounded 3-prong electrical receptacle recessed into the back wall. Electrical outlet location is critical for proper cord storage when compactor is installed.

If the compactor is to be located in or near a corner of base cabinets, allow 2" minimum clearance from the corner to prevent interference with adjacent door handles.

Note:

If cord is to be plugged in directly behind compactor add 2-1/2" to overall depth in order to allow proper clearance for the electrical cord.

Listed by

Underwriters

RLaboratories

	For answers to your Monogram,	GE Profile or
	®	™
	GE® appliance questions, visit our website at
Specification Revised 9/03	GEAppliances.com or call GE Answer Center®
	service, 800.626.2000.

160005