GE Monogram GCG1500P, ZCGP150P, GCG1700P, GCG1580P Location Requirements, Electrical Requirements

Models: GCG1500P ZCGS150P GCG1580P GCG1700P ZCGP150P

1 28
Download 28 pages 49.16 Kb
Page 4
Image 4

Location Requirements

Product Dimensions

34¹⁄₈"

(86.7 cm)

15"24"

Clearance Dimensions

B

 

 

 

A

 

 

 

 

 

 

 

 

 

 

 

 

(38.1 cm)

Cutout Dimensions

3" min.

(61 cm)

A. Leave 6" (15.2 cm) of clearance space to the right side of the compactor in order to remove the compactor bags.

B. Leave 23" (58.4 cm) of clearance in front of the compactor in order to fully open or remove the compactor drawer.

Electrical Requirements

WARNING

(7.6 cm)

A

34¹⁄₄" min.

(87 cm)

24" min.

(61 cm)

18" min. (45.7 cm)

15¹⁄₄" min.

(38.7 cm)

A. Grounded electrical outlet must be a minimum of 3" (7.6 cm) away from surrounding cabinets or nearby walls as shown. It can be placed either to the left or the right side of the compactor.

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or electrical shock.

Recommended Grounding Method

This compactor is for use on a single phase, 115-volt, 60 Hz, AC only, 15- or 20-amp fused and properly grounded circuit and is equipped with a grounding plug as shown below. It is recommended that a separate circuit serving only this appliance be provided.

This compactor must be grounded while in use to reduce the risk of electric shock. The compactor is equipped with a three-conductor cord and 3 prong grounding-type plug to fit the proper grounding- type receptacle. The green (or green and yellow) conductor in the cord is the grounding wire. Do not connect the green (or green and yellow) wire to a live terminal.

4

Page 4
Image 4
GE Monogram GCG1500P, ZCGP150P, GCG1700P, GCG1580P, ZCGS150P manual Location Requirements, Electrical Requirements