Remove packaging
Controls and Features
Beverage Center
Before using, be sure all packing materials | If you are discarding an old refrigerator, |
and tape have been removed. There is a | remove the doors to reduce the danger of |
shipping bracket below the handle. | children being trapped inside. |
Remove the bracket and replace the three |
|
screws with the plug buttons. |
|
Temperature control
The temperature range of the beverage center is from the mid thirties to the low fifties.
As with any refrigeration product, there is a slight temperature variance at different locations within the cabinet.
The coolest area will be in the upper part of the cabinet
The cooler area will be in the middle section
The lower part of the cabinet is the warmest section
To set the control, turn it to the middle thermostat setting. Once the beverage center is loaded, allow at least 48 hours before making any adjustments to the initial setting.
5
6
7
4 |
|
EDL | O |
R | |
| C 3 |
| 2 |
| 1 |
O | |
FF |
|
Interior light and switch
The interior light makes it easy to view your wine labels and enhances the display of your collection.
When the switch is in the OFF position, the light comes on only when the door is opened.
Pull-out racks
Loading tips and suggestions
The bottom racks pull out so bottles can be easily added or removed.
Do not put tall bottles on the bottom rack. They may prevent the door from closing.
• The bottom rack may be removed for | • Do not allow children to climb, stand or | |
storing large items. | hang on the beverage center shelves. | |
• Remember to turn off the light when it is | They could seriously injure themselves | |
and possibly cause damage to the | ||
no longer needed. | ||
beverage center. | ||
|
9
