GE Monogram ZDI15CWW dimensions High Locate Standpipe in exact Center of The Cutout

Monogram.™

ZDI15CWW - GE Monogram™ High-Production, Large Capacity Automatic Icemaker

Dimensions and Specifications (in inches)

3"11-1/2"

28-1/2" 9"

Electrical Supply Should

Enter From Back Wall

In Shaded Area.

4-5/8"

High

7-1/2"

15"

Locate Standpipe in exact

Center of The Cutout

The Monogram™ automatic icemaker can be used free-standing or as a built-in, under the countertop.

The Monogram™ automatic icemaker requires a 115 Volt, 60 Hz., AC only power

supply, with an individual, properly grounded branch circuit, protected by a 15 amp fuse or circuit breaker.

The Monogram™ automatic icemaker is equipped with a gravity drain to prevent water from flowing back into the ice storage bin. Although a floor drain is acceptable, the ideal installation has a standpipe with a 2” to 1-1/2” pvc drain reducer installed directly below the outlet of the drain tube.

To achieve a custom appearance, the icemaker door accepts 3/4” custom panels (using ZIP75WW White Kit) to coordinate or contrast with cabinetry.

Note: A drain pump is necessary when a floor drain is not available. Order ZPK1 Drain Pump Kit or contact your local plumber for a recommended pump available in your area.

Handle

Left Trim

29-1/2"

Custom

Panel

Right Trim

14-23/32"

For answers to your Monogram,®

GE Profile Performance Series,™

GE Profile™ or GE appliance questions, call

GE Answer Center® service, 800.626.2000.

Listed by

Underwriters

RLaboratories

Specification Revised 2/00