GE Monogram ZDP48L4GWSS dimensions Natural Gas Model, Accessory Requirements, Advance Planning

Monogram.™

ZDP48L4GWSS—48" Professional Ranges

Dimensions and Specifications (in inches)

ZX22B48WSS

ZX12B48WSS

These ranges are factory set for either natural gas or liquid propane gas.

48" Natural Gas Model:

ZDP48N4GWSS–4 gas burners, grill and griddle

48" Liquid Propane Gas Model: ZDP48L4GWSS–4 gas burners, grill and griddle

Accessory Requirements:

All models require the installation of a backguard. A backguard should be ordered at the same time as the range. Both must be on site at the time of installation.

Order one backguard for 48" models: ZX1B48WSS–1-1/2" high backguard (required for island installations) ZX12B48WSS–12" high backguard ZX22B48WSS–22" high backguard with warming rack (2 piece)

ZX1B48WSS

Available

Backguards

35-1/4"-36-3/4"

21-1/4"

12"

1-1/2"

Advance Planning:

Refer to dimensional drawings for appropriate placement and necessary clearances when planning

the installation.

•Cabinetry cannot be installed directly above the range.

•This range requires the installation of a vent hood, 30" to 36" above the surface.

–The vent hood must be at least 24" deep.

–The vent hood must be the same width as the range.

–The vent hood blower should provide at least 800 CFM and up to 1200 CFM.

–When installing a range that includes a grill, select a blower on the high end of the CFM recommendation.

•Working areas adjacent to the range should have 18" minimum clearance between countertop and cabinet bottom.

•Clearance between range and side wall or combustible material must be at least 12" on each side.

28-1/4"

	3-1
47-7/8"	For answers to your GE Monogram,™ GE Profile,™
	GE, Hotpoint and RCA appliance questions, call
	GE Answer Center® service, 800.626.2000.

UL	Listed by
	Underwriters
R	Laboratories
Revised 7/97