Reversing the Door Swing

Wine Chiller

To reverse the door

Parts included:

1.Top left case hinge

2.Bottom left case hinge

3.Left and right side decorative hinge cover

4.Decorative hinge screw hole cover

5.Torx® driver bit

Tools required:

1.Phillips screwdriver

2.Electric drill

To remove the door:

1.Flatten the shipping carton to use as a pad.

2.Remove the 2 screws and the toekick. Set aside the screws and toekick for final installation.

3.Use the supplied Torx® bit and electric drill to remove the 3 screws holding the top case hinge. Lift off the hinge. (Screws will be used to install the new hinge.)

4.Lift the door off the bottom case hinge.

5.Remove the bottom case hinge pin and bracket.

Rotate the door:

The handle will be on the right side of the door; hinges will be installed on the left side of the case.

1.Remove the door stop and cam riser on the original bottom right side of the door.

2.Remove the fill plug on the top right side of the door.

3.Turn the door over and reinstall the fill plug on the new left side.

To reinstall the door:

1.Install the original door stop and cam riser onto the bottom left side of the door.

2.Install the new supplied bottom case hinge pin and bracket onto bottom left side.

Install

3 Hinge

Screws

Remove

Top Hinge

Hinge

Pin and

Bracket

Door Stop

and Cam Riser

Remove

Hinge

3.Place the door onto the bottom case hinge.

4.Install the supplied left-hand top case hinge with the 3 original screws.

5.Select the hinge cover marked with an “L”.

6.Peel backing off the tape inside the decorative hinge cover.

7. Press and snap the

Install Covers

hinge cover into place.

 

8. Snap the screw hole cover into place on the opposite side.

Important: Check to be sure screws are tight and that the door is straight and does not sag. The door should swing freely.

NOTE: See Installation Instructions to apply hinge cover and screw hole cover.

Position nameplate:

Apply the Monogram nameplate on the door using the template included in the installation instructions.

12

Page 12
Image 12
GE Monogram ZDWC240 owner manual Reversing the Door Swing

ZDWC240 specifications

The GE Monogram ZDWC240 is a premium wine cooler designed to enhance the experience of wine enthusiasts and casual drinkers alike. With a capacity of up to 24 wine bottles, this unit combines state-of-the-art technology with elegant design, making it a perfect addition to any sophisticated kitchen or entertaining area.

One of the standout features of the ZDWC240 is its dual-zone temperature control. This innovative system allows users to set two distinct temperature zones, ensuring optimal storage conditions for both red and white wines. The upper zone can be set between 41°F to 55°F, ideal for white wines, while the lower zone can be adjusted from 55°F to 65°F, perfect for reds. This flexibility guarantees that each bottle is served at its best temperature, enhancing the wine's flavor and aroma.

The GE Monogram ZDWC240 also boasts advanced cooling technologies. It uses a whisper-quiet compressor system that minimizes vibration, preserving the integrity of the wine by preventing disruption of the natural sediment. Additionally, the wine cooler features a convection cooling system that ensures even temperature distribution, maintaining consistent conditions throughout the unit.

Aesthetically, the ZDWC240 is designed with sleek lines and a stainless steel finish, making it a striking piece in any décor. The unit is equipped with LED lighting, allowing for easy visibility of contents while providing a soft glow that highlights the bottles without generating excess heat. The glass door is not only stylish but also UV-resistant, protecting the wine from harmful light exposure that can degrade quality over time.

For convenience, the ZDWC240 includes adjustable wood shelves that allow for flexible storage configurations and easy access to your favorite selections. The shelves cradle each bottle to prevent rolling and overcrowding, making sure every bottle is stored securely and within reach.

In terms of energy efficiency, the GE Monogram ZDWC240 is designed to minimize energy consumption while providing exceptional performance. This not only helps in reducing electricity costs but also aligns with environmentally-friendly practices.

Overall, the GE Monogram ZDWC240 wine cooler combines functionality, luxury, and innovation, making it an excellent choice for anyone serious about wine preservation and enjoyment. Its thoughtful features and elegant design make it a standout appliance in the realm of wine storage solutions.