Installation Instructions

TOOLS REQUIRED

#2 Phillips screwdriver

Adjustable wrench

PARTS SUPPLIED

Monogram nameplate

Hardware for changing door swing

Optional stainless steel toekick with screws and spacers

Left and right side hinge covers

Top screw hole cover

GROUNDING THE WINE CHILLER, WINE RESERVE AND BEVERAGE CENTER

IMPORTANT – Please read carefully.

FOR PERSONAL SAFETY, THIS APPLIANCE MUST BE PROPERLY GROUNDED.

The power cord of this appliance is equipped with a three-prong (grounding) plug which mates with a standard three-prong (grounding) wall receptacle to minimize the possibility of electric shock hazard from this appliance.

Have the wall outlet and circuit checked by a qualified electrician to make sure the outlet is properly grounded.

Where a standard 2-prong wall outlet is encountered, it is your personal responsibility and obligation to have it replaced with a properly grounded 3-prong wall outlet.

DO NOT, UNDER ANY CIRCUMSTANCES, CUT OR REMOVE THE THIRD (GROUND) PRONG FROM THE POWER CORD.

DO NOT USE AN ADAPTER PLUG TO CONNECT THE REFRIGERATOR TO A 2-PRONG OUTLET.

DO NOT USE AN EXTENSION CORD WITH THIS APPLIANCE.

Staining Wood Drawer Fronts

The drawer fronts are unfinished cherry wood. During use, oil from hands may accumulate and stain the wood.

The drawer fronts may be stained and sealed to match adjacent cabinetry. The tinted glass will make the stained wood appear darker. A true color match can be seen only when the door is opened.

Apply the stain and sealer according to the manufacturer’s instructions. To avoid unpleasant odor, keep the door open to ventilate and allow the stain/sealer to dry completely before using the product.

installing THE custom frame panel

Go to page 6 for custom frame panel size, depending on your cabinet size and style.

Install a custom handle of your choice onto the custom panel before the panel is secured to the door.

The custom panel should be installed before sliding the product into the installation location.

STEP 1 REMOVE PACKAGING

Remove corner blocks and foam drawer stops.

Remove all packing material, tape and protective plastic coverings.

Remove stainless steel toekick taped to the back of the unit.

CAUTION: Small objects are a choke hazard for children. Remove and discard any parts not used.

MISE EN GARDE : Les petits

objets peuvent étrangler les enfants. Il faut jeter toutes les piéces qui ne sont pas utilisées.

5