Design Guide

SIDE-BY-SIDE INSTALLATIONS

Increase storage capacity by installing two Monogram beverage centers, wine chillers or wine reserves together. Or, for a complete refreshment center, install any two

of these units together.

•A side-by-side installation requires at least a 47-1/2"- wide minimum opening for standard installation and a 48-1/2"-wide minimum opening for flush installation of stainless steel models. A 49-1/2"-wide minimum opening is required for side-by-side flush installation of custom framed models.

•Products must operate from separate, properly grounded receptacles.

PRODUCT CLEARANCES

The stainless steel wine chiller, wine reserve and beverage center is factory set for a 110° door swing. Models that accept custom panels have a 95° door swing.

When installed in a corner:

•Allow 4" min. clearance on the hinge side for the 90° door swing and to allow racks to slide out.

•Allow 10" minimum clearance on the hinge side for a full 110° door swing. (Models ZDWI240WII and ZDBI240WII have a 95° door swing.)

NOTE: Custom handle clearances may vary, depending on custom handle depth.

10" Minimum

90° Door Swing

to Wall

 

 

 

 

21-5/8"

 

 

 

 

 

 

 

23-5/8"

 

 

 

 

 

90ϒ

 

 

 

 

110°*

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

4" Minimum

*95° Door Swing on Custom Frame Models

to Wall

•The door swing is reversible on all models. If desired, change the door swing before installation or before installing the custom frame panel.

Choose the location:

•These products may be closed in on the top and three sides as long as the front is unobstructed for air circulation and proper access to the door.

•Do not install these products where the temperature will go below 55°F (13°C) or above 90°F (32°C).

•Do not install where it will be subject to direct sunlight, heat or moisture.

•These products are not designed to be stacked one over the other.

Black or Stainless Steel Toekick Options

•These products are shipped with a black toekick installed. An optional stainless steel toekick is also supplied with each product. For shipping purposes, the stainless steel toekick is secured to the back of the unit.

4