GE Monogram ZFSB25D SS Planning Information, Product Dimensions And Clearances, ZFSB25 and ZFSB26

Planning Information

PRODUCT DIMENSIONS AND CLEARANCES

THE INSTALLATION SPACE

The opening width must be 36-1/4".

32"

Depth

72"

	36"
34"	30-1/2"
Including	Including
Handles	Handles

28"

Depth

72-1/4"

36"

36-1/2"

Wall View

Electrical

Area

73" min.

Water Supply

Water And Electrical Locations

The opening must be prepared with the electrical and water supply located as shown.

ZFSB26ZFSB25

This Monogram free-standing refrigerator requires the following clearances for proper air circulation, plumbing and electrical connections.

Air Circulation Clearances:

•1/8" on each side

•1" at the top

•1" at the back (1-1/2" for ZFSB25)

Installation in a corner:

•Allow 4" clearance on each side to an adjacent wall for a 90° opening and access to drawers.

ZFSB25 and ZFSB26 ZFSB25 ZFSB26

14-1/4"

19"

160° Door Swing

•On the freezer side, allow 14-1/4" min. clearance for removal of ice bin.

•On the fresh food side, allow 19" min. clearance to wall for removal of drawers.

Additional Specifications

•A 115 volt 60Hz., 15 or 20 amp power supply is required. An individual properly grounded branch circuit or circuit breaker is recommended. Install a properly grounded 3-prong electrical receptacle recessed into the back wall.

NOTE: GFI (ground fault interrupter) is not recommended.

•Water line can enter the opening through the floor or through an adjacent cabinet, as close to the back wall as possible. The water line should be 1/4" O.D. copper tubing between the cold water line and water connection location at the rear of the refrigerator. Installation of an easily accessible shut off valve in the water line is recommended.

3