GE Monogram ZGG300LBPSS dimensions Outdoor Built-inCooktop, 29-7/8, the back edge of the cutout

ZGG300NBPSS - Natural Gas Built-in Outdoor Grill ZGG300LBPSS - LP Gas Built-in Outdoor Grill

Dimensions and Installation Information (in inches)

12" Min. to Combustibles				Outdoor Built-in Cooktop
				These grills are designed to be installed into a non-
4" Min. Clearance for Lid				combustible enclousure.
to Non-Combustibles				• The grill drops into the opening and hangs from
				the side flanges. It does not require support from
			26"	the bottom.
				• The cutout must be completely covered with
				non-combustible material such as stone, brick,
				ceramic tile, concrete board, etc. The countertop
				surface and edges must be flat and level.
				• If the countertop has an overhang, it must be
27"	29-7/8"			notched or cut back flush with the front face of
				the cabinet below.
				• Allow at least 12" minimum clearance at the
				back of the grill when the exhaust is directed to a
				window or surface that is difficult to clean. Allow
				at least 4" clearance behind the grill to allow the
				hood lid to open. See notched detail below.
				• Allow 12" minimum clearance on both sides
				and the back of the grill to adjacent vertical
				combustible construction.
10-1/4" from				• These gas grills cannot be used below any type of
				overhead construction.
Bottom of
Support Flange				• These grills are designed for outdoor use only. Do
				not locate the cooktop in a building, garage or
*25-1/2"				other enclosed or semi-enclosed area.
Countertop Depth				• Locate the backside of the grill away from
27" to Front
				prevailing winds and avoid cooking in windy
of Control Panel				conditions.
28-1/2" to Front of Bullnose
*The weight of the grill is fully supported by		28-3/4"
the side trims. The back of the grill overlaps					Gas and
the back edge of the cutout.					Electrical
					Locations
	24-1/2"
				Grill Cutout	10-7/8"
					Opening
For answers to your Monogram,® GE Profile™ or		36"			for Optional
			1-1/8" Min.		Access Doors
GE® appliance questions, visit our website at		Min.
ge.com or call GE Answer Center® service,
800.626.2000.

Specification Created 10/08 170133