GE Monogram ZIC360NM dimensions Monogram, Design Guide, Specification Revised 8/02, Framed panels

Monogram.™

ZIC360NM – GE Monogram 36" Built-In Bottom Freezer Refrigerator with Automatic Icemaker

Design Guide

Standard Door Handle Framed Panel

Standard supplied handles shown in 1/4" panel position.

	3/4" Overlay Panel
Standard	.10" Thick Spacer Panel
Door Handle	1/4" Thick Backer Panel

Standard supplied handles shown in 3/4" overlay panel position.

71-1/2" Finished Width

Framed panels

You may install 1/4" thick custom panels from your cabinet manufacturer. The decorative panel slides into the factory installed trim. Or, order black, white and stainless steel accessory panels from your Monogram dealer.

Overlay panels

You may also choose to install custom overlay panels from your cabinet manufacturer. This design provides a seamless appearance which integrates smoothly with surrounding cabinetry.

Door and Drawer Handles

The standard supplied handles can be adjusted to accommodate both framed or overlay panels. Custom handles of your choice, supplied by your cabinet maker can also be installed. If desired, you may order ZKHCSS2 Monogram stainless steel tubular handle kit for overlay panels.

Side Panels

Side panels must be used whenever the sides of the refrigerator will be exposed.

Optional Accessory Kits

•ZKHCSS2: Monogram Tubular Stainless Steel handles designed to fit overlay panels.

•ZUG2: For side by side installation of two trimmed bottom-freezer refrigerators. This kit provides for the installation of a unified custom grille panel to span the width of two units using a framed or overlay panel.

Accessory Panels

White, black and stainless steel accessory panels are available from your Monogram dealer. Panels are cut to size and ready to install.

ZPBC360 – Black, ZPWC360 – White, ZPSC360 – Stainless Steel Panels

ZUG2 Unified Grille Panel Kit

2-5/16"Electrical 7"

10"

84-1/2" max 24" Cutout

83-1/2" min Depth Finished

Opening

5" Water Supply

26"

3-1/2"

	24-3/16"	Wall View
7"

10"

74-1/2" From

Floor to Bottom

of Electrical

Water Supply 5"

26"

3-1/2"

•If you are installing two refrigerators, side by side, the installation space must be 71-1/2" wide.

Note: Additional cutout width may be required when side panels are used. Add side panel thickness to the finished cutout to calculate rough-in width.

•The water and electrical locations for each product must be located as shown.

•A separate 115V, 60Hz., 15 or 20 amp power supply is recommended for each product.

Listed by

Underwriters

RLaboratories

	For answers to your Monogram,® GE Profile™ or
	GE appliance questions, visit our website at
Specification Revised 8/02	GEAppliances.com or call
	GE Answer Center® service, 800.626.2000.