GE Monogram ZIFS36NM dimensions Monogram.“, Enclosure Cutout and Product Dimensions in inches

Monogram.“

ZIFS36NM – GE Monogram 36" Built-In Stainless Steel All-Freezer

Enclosure Cutout and Product Dimensions (in inches)

10-3/4" Max.	35" Case	ZIFS36NMRH, Freezer
10" Min.
		Handle on the left side, the door swings left to right.
24-3/4"	36" Overall

26-3/4"

73-1/2"

4"

84-1/2" Max.

83-1/2" Min.

ZIFS36NMLH, Freezer

Handle on the right side, the door swings right to left.

Caution

Refrigerators are much heavier at the top than at the bottom – be extra careful when moving.

•To achieve a flush fit, the finished cutout width must be at least 36" wide.

•In a semi-flush installation, the finished cutout must be 35-1/2".

*Finished Width
2-1/2		Electrical	Wall View
	6	Area

•The electrical and water locations must be located as shown for either type of installation.

35" 24-3/4" Case Case Width Depth

84*

26-3/4" 36" Frame to Frame

Including

Tubular

Handles

*Shipped at 84" installation height. Can be adjusted to 83-1/2" or 84-1/2" with Grille Panel Kits.

Specification Revised 4/05 110154

	5
84-1/2" max	24-3/4" Total	75" From Floor
83-1/2" min	Depth	to Bottom
Finished		of Electrical
Opening		Area
	5 Water Supply	5
		3-1/2

3-1/2

*36" for a flush installation.

35-1/2" Min. for a semi-flush installation.

Note: Additional cutout width may be required when side panels are used. Add side panel thickness to the finished cutout to calculate rough-in width. See installation examples on the following page.

Listed by

Underwriters

RLaboratories

For answers to your Monogram,® GE Profile™ or

GE appliance questions, visit our website at

GEAppliances.com or call

GE Answer Center® service, 800.626.2000.