Monogram.™
ZISB480DM – GE Monogram 48"
1/4" FRAMED PANEL DIMENSIONS
If you choose to install framed panels, they must
be cut to the dimensions shown. The panels willDoor slide into the frame on the door and grille.
If the custom panel is less than 1/4" thick and it fits loosely in the door frame it can be backed up with a piece of filler material or foam tape to improve the fit.
5/16" Trim Reveal
1/4" Panel
IMPORTANT NOTE: Maximum weight for fresh food panel is 50 pounds and 30 pounds for freezer panel.
IMPORTANT NOTE – Dispenser Models
The refrigerator is supplied with two dispenser trims, one for framed panels and one for overlay panels.
•If the panel is less than 0.250" thick a noticeable gap may be created around the dispenser trim. Foam tape may be applied on the door to improve the fit.
•If the panel is more than 0.250" thick, the dispenser trim cannot be secured to the door.
SIDE PANELS | 24" |
Side panels must be used whenever the sides of the refrigerator will be exposed. The 1/4" side panels will slip into the side case trim. Order the side panels from the cabinet manufacturer.
* Depending on installation height.
Grille Panel
Dispenser
Cutout
Freezer | Fresh Food |
Panel | Panel |
Dispenser Cutout
The framed panel
thickness to fit the dispenser trim.
*84"
*3" to 4"
Listed by
|
|
|
|
|
| ||
|
| ||||||
|
|
|
Specification Revised 8/02
| Underwriters |
|
|
|
| As an ENERGY STAR® Partner, | |||
R | Laboratories | meets the ENERGY STAR® | ||
| GE has determined that this product | |||
|
| guidelines for energy efficiency. |
For answers to your Monogram,® GE Profile™ or GE appliance questions, visit our website at GEAppliances.com or call
GE Answer Center® service, 800.626.2000.