ZV30RSFSS – GE Monogram 30" Stainless Steel Professional Hood
Dimensions and Specifications (in inches)
12"
Warming
Shelf
Each hood is shipped with a stainless steel backguard and a warming shelf. Hoods may be installed with the shelf or backguard alone, or with both as shown.
Backguard
25"
Installation Clearances
These vent hoods are designed to be installed onto a wall or beneath a soffit or cabinet.
Installation with Warming Shelf
•Hoods must be installed 32" Min., 38" Max. over any type cooking surface when warming shelf is used.
Installation without Warming Shelf
•Install these hoods 30" Min. to 36" Max. above the cooking surface when installed over any professional style cooktop or range.
•These hoods may be installed 24" min. above a gas or electric
Note: Clearances may vary due to type of cooking product and local codes. Check with local inspectors to be sure standard is applicable.
Soffit Installation |
| Wall Mount Installation |
|
SOFFIT | SOFFIT | SOFFIT | SOFFIT |
30" Min. | 32" Min. | 30" Min. | 32" Min. |
36" Max. | 38" Max. | 36" Max. | 38" Max. |
Install these hoods 30" Min. to | Allow 32" Min. and 38" Max. |
36" Max. over a professional | clearance above any cooking |
style cooktop or range. | surface when installed with shelf. |
In this installation the ductwork running from the top of the hood will be concealed in the soffit or upper cabinetry.
Specification Created 10/02
Install these hoods 30" Min. to | Allow 32" Min. and 38" Max. |
36" Max. over a professional | clearance above any cooking |
style cooktop or range. | surface when installed with shelf. |
For this installation, a decorative duct cover is available to conceal the ductwork running from the top of the hood. Use of the duct cover requires special consideration to the installation height above the countertop.
|
| For answers to your Monogram,® GE Profile™ or |
| Listed by | GE appliance questions, visit our website at |
| Underwriters | GEAppliances.com or call |
R | Laboratories | GE Answer Center® service, 800.626.2000. |
|
|
