Geemarc AMPLI600 manual Dialling Mode, Settings, Select ‘TONE’or‘PULSE’

SETTINGS

Dialling Mode

The Tone/Pulse is factory pre-set to Tone (Tone). In the US, all telephone exchanges now use Tone dialling. If your phone does not dial out, it is probably being used from an older private switch-board (PBX). In this case, theTone/Pulse setting must be moved to Pulse (Pulse).

Press MUTE

Use ▲ or ▼ to select ‘SET PHONE’

Press OK

Use ▲ or ▼ to select ‘TONE /PULSE’

Press OK

Select ‘TONE’or‘PULSE’

Press OK to confirm

Press C three times to exit

12