SETTING UP

1 - CONNECTING THE TELEPHONE

1 - Connect the handset cord.

2 - Open the battery compartment by pulling back the latch.

3 - Insert correctly 4 x AAA 1.5V alkaline batteries (not supplied) in the battery compartment (*). Bat- teries are required if you wish to increase the ringer level up to 10 dB.

4 - Snap the battery door back in place.

5 - Connect the line cord to the socket (*).

2 - RINGER SETTINGS

A switch located on the upper side allows the ringer to be switched HI,LOW,OFF:

: Off,

: Low,

: Hi

(*) Classified TNV-3 according to EN60950 standard.

SETTING UP

Your phone comes with the ringer switched to «High» and the melody set to «6»:

 

 

Low

Mid

High

 

Melody 1

1

2

3

 

Melody 2

4

5

6 (by default)

 

 

 

 

 

 

Melody 3

7

8

9

 

 

 

 

 

If you don’t like the ringer melody, you can choose a new one by changing the settings as per instructions below:

-Lift the handset.

-Press button.

-Press # button.

-Press any of the 1 - 9 dial keys.

The new ringer settings will be activated with the next incoming call.

Note: The ringer level will be increased up to 10 dB if you insert batteries into the battery compartment.

6

7

Page 4
Image 4
Geemarc CL1100 manual Setting UP, Connecting the Telephone, Ringer Settings