SETTING UP

3 - DIALING TYPES AND GROUNDING

Switch ETR/PR/T is located on the upper side of english type models. If you wish to connect your CL1100 to a public UK/French switch-board (PBX), move switch ETR/PR/T to position 3 (T). This will ensure optimal compatibility of your phone with most (99%) PBX.

P T

ETR R

Positions: 1 2 3

Position 1:

Pulse dialing. The R is grounded. This option can be used only within the UK in very special cases.

Position 2:

Pulse dialing. The R is set according to the determined adjustment (see «T ime Break Recall Setting for R Function» p.9).

Position 3:

Tone dialing. The R is set according to the determined adjustment (see «T ime Break Recall Setting for R Function» p.9).

SETTING UP

If you are using your CL1100 with a hearing aid, set your hearing aid to “T” position.

4 -TIME BREAK RECALL SWITCH (300/100)

Check the Time Break Recall setting of your CL1400. For the UK the Time Break Recall should be set to 100 mS. It can be switched to 300 mS for other locations or PBX’s.

8

9

Page 5
Image 5
Geemarc CL1100 manual Dialing Types and Grounding, Time Break Recall Switch 300/100