Geemarc Dect 150, Dect 300 HANDSET SETTINGS HANDSET SETTINGS

Shaker Settings

A switch located on the right side of the telephone handset allows the

shaker to be activated when receiving an incoming call.

Handset Registration

The handset that came with your base is already registered to the base

(factory setting). The icon will be fixed on the display. If this icon is

flashing, the handset is not registered to the base and you will need to

register it. (See Additional Handsets and Bases section).

17

Technical Settings

Caller Display Settings

There is a choice of two Caller Display settings:

1 for UK

2 for France

Dialling Mode (Tone/Pulse) Settings

In the UK, all telephone exchanges now use Tone dialling. The Tone/Pulse

setting is pre-set to Tone on your telephone.

If your phone does not dial out, it is probably being used from an older

private switchboard (PBX). In this case, the Tone/Pulse setting must be

changed to Pulse.

Telephone Network Settings

There is a choice of four telephone network settings. These settings are

used to match the signal level when working on different telephone

networks.

A = Factory Setting – default value

B = Normal

C = Low

D = Very Low

Flash Time Settings

Your telephone works with a flash time setting for United Kingdom

(R=100ms).

In France, flash time setting should be R=300ms.

Dial Pause Settings

This setting enables you to insert a 3 second pause after the first digit

dialed. The rest of the telephone number is dialed normally. This can be

used when plugged in at a private telephone exchange ( in a hotel, an

office etc).

18

Shaker On

Shaker Off

HANDSET SETTINGS HANDSET SETTINGS

Contents

Main Ampli DECT 150 Ampli DECT 300 CONTENTS CONTENTS Unpacking the Telephone INTRODUCTION INTRO DUCTION Ampli DECT150 3 Ampli DECT300 DESCRIPTION Handset Description 6 DESCRIPTION 7 DESCRIPTION DESCRIPTION Base Description 8 9 DESCRIPTION DESCRIPTION LCD Screen Description 10 1 Handset Range DESCRIPTION INSTALLATION Location 11 LCD Screen Navigation 14 INSTALLATION BASE SETTINGS Battery Use Ringer Settings Press to activate the menu HANDSET SETTINGS HANDSET SETTINGS 15 Phone Book Two Ringer Settings Phone Book One Ringer Settings HANDSET SETTINGS HANDSET SETTINGS Flash Time Settings Telephone Network Settings Dialling Mode (Tone/Pulse) Settings Caller Display Settings HANDSET SETTINGS USING THE TELEPHONE Receiving a Call Recalling Recent Numbers Receiving Volume and Tone Adjustm ent USING THE TELEPHONE USING THE TELEPHONE Deleting Recent Numbers Paging the Handset USING THE TELEPHONE USING THE TELEPHONE Press , located on the front of the base 23 Amplify Switch at OFF Position PHONE BOOK PHONE BOOK 25 Phone Book Handset Melody Settings PHONE BOOK PHONE BOOK Modify a Phone Book Entry View Caller Display List Delete an Entry from the Caller Display List Dial a Number from the Caller Display List Store Names and Numbers into the P hone Book Operating the Answering Machin e from the Handset OR Listening to Messages OR Page Press to activate the menu 37 Answering Machine Settings System Day and Time Day Time Delay NSWERING MACHINE Press to activate the menu Remote Access to Answering Machine Dial your telephone number from the remote telephone and let it ring NSWERING MACHINE 1/1--- > NSWERING MACHINE Using Several Handsets Internal Calls Call Transfer Using Several Base Other Optional Accessories Adding a Base TROUBLESHOOTINGTROUBLESHOOTING Remove one of the batteries RESTORE FACTORY SETTINGS SAFETY INFORMATION Environmental Cleaning General GUARANTEE GUARANTEE Please note: The guarantee appli es to the United Kingdom only current is lower than 18 mA.