USING THE PHONE
willappear on the LCD display as you dial the digits.
-Press keyonce again.
- Press the M1,M2 or M3 keys (for storing the number into one of these
locations)or the MEM key followed by a digit 0to 9.
Tochange a number already stored in Memory: simply follow the above
procedure,and the new number will replace the number stored previously.
NOTE:If you are using the unit with a PABX which needs you to wait for
anoutside line, at step 3 always key in the key.The key
insertsa 3 sec PAUSE when dialing. The display will show “P” followed
bythe number.
7- DIALLING NUMBERS FROM MEMORY
-Lift the handset.
TheLCD will display the call timer as follows for example:
-Press the memory location key (s) i.e. M1,M2,M3 or MEM followed by a digit
0to9.
Thedigits being dialled will appear on the LCD display at the same time. For
example:
Thecall timer will start.
11

0170737237

00-04

/P /P