Location
Ensure you situate the telephone close enough to the power socket so that
the cable will reach safely without stretching. Also, the mains power needs
to be easily accessible in case you need to disconnect the power.
Make sure the telephone is at least 1 metre away from other electrical
products e.g.TV, radio and monitors so as to avoid interference. Also,
avoid direct heat and sunlight.
We advise you to place the telephone on a table cloth or similar, as the
rubber feet on the base can mark some surfaces
Handset Range
The telephone has a range of 30-50 metres indoors and up to 300 metres
outdoors. The range will be reduced when there is no clear line of sight
between the base and handset. Place the base as high as practically
possible to ensure the best signal between the base and the handset. The
icon at the top left of the LCD displaywill flash and the signal strength
bars will disappear to warn you if you have moved out of range of the
base. You will need to move closer to the base station as the telephone
line might be disconnected and the handset will return to standby.
Release a Handset
A registered handset can be removed from a base if necessary.
Press to activate the menu
Use S and T to scroll through the menu to select
‘BASE MENU’ Press OK
Use the keypad to type in your PIN (default 0000)
Press OK
Use S and T to scroll through the menu to select ‘RELEASE’
Press OK
All handsets currently registered with the base will be displayed on
the LCD display
Using the keypad, enter the number of the handset you wish to
deregister
When the selected handset number disappears from the LCD
display, press OK
INSTALLATION
This icon will
flash when
handset is out o
f
range
11
A
DDITIONAL HANDSETS & BASES