Geemarc MyDECT manual Create a Call by Call Entry, Key Tone Settings, ‘Key Beep’, Insert Pause

CALL BY CALL

Sometimes special network service numbers are required to precede the telephone number you are calling. Call by Call allows you to store the special number and then recall it very easily.

3 call by call numbers can be stored.

Create a Call by Call Entry

Press to activate the menu

Use S and T to scroll through the menu to select

‘CALL BY CALL’

Press OK

Use S and T to scroll through the call by call memory locations (1,

2 or 3) until you find the required entry.

Using the keypad, enter the desired number (up to 10 digits)

Press OK to save the number and return to standby

Note: Use C/R to correct a mistake. C/R will clear the last digit entered. To clear all digits, press and hold C/R, then enter the correct number.

Insert Pause

Inserting a pause provides a delay of 3 seconds. This is necessary with some telephone systems.

To insert a dialling pause between numbers when storing a number, press until P appears in the LCD display.

39

HANDSET SETTINGS

Note: Use C/R to correct a mistake when entering the VIP telephone number. C/R will clear the last digit entered.

To clear all digits, press and hold C/R, then enter the correct number.

Key Tone Settings

There are 3 options for the key tone each time a key is pressed:

Type 1	= Standard key tone
Type 2	=	Two frequency tone
Off	=	No sound when a key is pressed
		Press	to activate the menu

Use S and T to scroll through the menu to select

‘KEY BEEP’

Press OK

Use S and T to scroll through the menu to select desired key tone.

Each time you press S and T, the handset demonstrates the key

tone you have selected

Press OK to save the key tone selection and return to standby

18