5.3 Erase the Caller ID Memory
1.Select the required Caller ID memory location by rotating the jog dial.
2.To delete single memory, press DELETE button once. The display will show the “DELETE?”. Press DELETE button for 2 seconds. The data for that call will be erased, and the CALL# and Caller ID information will be updated. If the most recent call in memory was erased, the display will show “END OF LIST”.
To delete all entire memory, press and hold DELETE button until the display shows “DELETE ALL?”. Press DELETE for 2 seconds until “NO CALLS” appears on the display. Both the total call and new call counters will become zero, and the current time and date will be displayed.
5.4 Call Back (Redial) from the Caller ID Memory
With the handset hung up on the base. Select the required Caller ID memory loca- tion by rotating the jog dial.
Press ENTER button, the display will show “PICK UP HANDSET”, press speaker- phone once or lift the handset, the display will show “DIALING...” and the connection is made.
OR
With the handset is picked up, select the required Caller ID memory location by rotating the jog dial, then press ENTER button. The display will show “DIALING...” and the connection is made.
5.5 Copy from the Caller ID to the Phone Book
You can copy Caller ID information to the phone book while you are reviewing the Caller ID information.
1.Select the required Caller ID memory location by rotating the jog dial.
2.Press STORE button, display will show “COPY TO DATABANK”.
3.Press STORE button again, display will show “SAVED!!”.
10
