CONNECTING AND OPERATING THE DVI BOOSTER
How to Connect the DVI Booster
1.Connect the long DVI cable from the source into the “DVI In” on the front of the DVI Booster. The DVI Booster is placed next to your display to regenerate the DVI cable.
2.Connect a short DVI cable from the “DVI Out” connection in the back of the DVI Booster to your display or projector.
3.If there is no video signal or there is signal noise in the picture, adjust the EQ Trim Pot located underneath the DVI Booster using a small flat head screw driver.
5
CONNECTING AND OPERATING THE DVI BOOSTER
How to Connect the DVI Booster
1.Connect the long DVI cable from the source into the “DVI In” on the front of the DVI Booster. The DVI Booster is placed next to your display to regenerate the DVI cable.
2.Connect a short DVI cable from the “DVI Out” connection in the back of the DVI Booster to your display or projector.
3.If there is no video signal or there is signal noise in the picture, adjust the EQ Trim Pot located underneath the DVI Booster using a small flat head screw driver.
5
