![](/images/new-backgrounds/1193611/19361115x1.webp)
PANEL DESCRIPTIONS
1IR Receiver
This receiver will receive commands from an optional
2DVI-I Input
This receptacle will accept digital and analog signals. When using a analog VGA source use a VGA to
35V DC Power Input
Connect the included 5V DC power supply between this receptacle and an open wall power socket. Once the power supply is properly connected the power LED indicator will become active.
4Power LED Indicator
Tis LED indicator will become active once the included 5V DC power supply has been properly connected and is supplying power to the unit.
5BNC Output Connectors
There are 4 BNC type output connectors. Each output connector is outlined below:
Output Mode ► | RGBS | Component | |
Connector ▼ | (cable color) | ||
| |||
S/Y | Composite Horizontal | Luma (Green)* | |
and Vertical sync | |||
|
| ||
R/Pr | Red | Red - Luma (Red) | |
|
|
| |
B/Pb | Blue | Blue - Luma (Blue) | |
|
|
| |
G/Y | Green | Luma (Green)* | |
|
|
|
*Either of these connectors can be used for the luma (green) signal when using component video.
6Menu Button
This button will open the
7- Button
This button will navigate down through the
8+ Button
This button will navigate up through the
5