RECEIVER UNIT DESCRIPTIONS
1Status
This LED indicator will glow bright blue, indicating that there is a valid connection between the Receiver Unit and Sender Unit. This LED will glow red when there is an interruption in the signal between the Receiver Unit and the Sender Unit.
2Power Receptacle
Connect this cable to the included 5 V DC power supply.
3SC Fiber Connectors
Connect two SC Fiber Optic cables from the Receiver Unit to the Sender Unit. Make sure that the Fiber Optic cables from both port A and B are connected to the same ports on the Sender Unit. See page 8 for details.
4DVI Input
Connect this part of the Receiver Unit to the DVI port on the Dual Link DVI display.
7
