Gefen EXT-HDMI1.3-442 user manual Panel Descriptions, Power Indicator

PANEL DESCRIPTIONS

1Power Indicator

This LED will become active once the included 5V DC power supply is properly connected between the unit and a open wall power receptacle.

2IR (Infrared) Receiver

This receiver will accept command for switching between input HDMI devices using the included RMT-4IR remote control.

3Internal EDID Mode Indicator

This LED will become active when the unit is using the pre-loaded EDID. See page 11 for more details.

4External EDID Mode Indicator

This LED will become active when the unit is using the EDID from the HDMI deice connected to HDMI output port 1. See page 6 for more details.

5Link Indicator

This LED will become active when the unit is properly connected to an HDMI capable device on either of the HDMI output ports.

6Input Indicators

There is one LED for each of the four input ports. The LED for the currently selected HDMI input will be active.

7S/PDIF Digital Audio Output Connector This S/PDIF output will supply supported external audio decoder or device such as

audio formats for output to an an amplifier or receiver.

8EDID Button

This button will toggle between the internal external EDID modes. To determine which mode is currently being used, please note which EDID mode LED is active on the front panel of the unit.

9Reset Button

This button will reset the unit and force all devices in the chain to re-transmit/ re-read EDID. It is essential that the unit be reset after the EDID mode has been changed.

10HDMI Input Ports 1-4

Connect up to four (4) Hi-Def sources these HDMI input ports.

11HDMI Output Ports 1-2

Connect up to two (2) HDTV displays to these HDMI output ports.

125V DC Power Receptacle

Connect the included 5V DC power supply between this port and an open wall power receptacle.

5