OPERATION NOTES
READ THESE NOTES BEFORE INSTALLING OR
OPERATING THE 4X2 SWITCHER FOR HDMI 1.3
•By default, display information from the display connected to HDMI output port 1 is sent back to the source. Therefore, the other display connected to the 4x2 Switcher for HDMI 1.3 must be capable of accepting the timings, resolutions and audio formats of the display that is connected to HDMI output port 1. It is recommended that the display with the lowest native resolution be connected to HDMI output port 1. This is to ensure that a compatible video signal will be able to be displayed on all connected monitors. There is a generic EDID programmed into the 4x2 Switcher for HDMI 1.3 that can be used instead. See page 11 for more details.
2
