RS-232 COMMANDS
A Command
Routes the specified Input to Output A.
Syntax:
A[no space]param1
Parameters: |
|
|
param1 | HDMI Input (Source) | [1 - 8] |
Example:
A5 routes Input 5 to Output A.
Notes:
Individual routing to other outputs (B - H) can be accomplished by using a similar syntax and substituting the A with the range B though H. For example, to route Input 7 to Output E, use the following command:
E[no space]7
See the table on page 16 for details.
ABCD... Multiple Routing Command
Route the specified source to any combination of Outputs.
Syntax:
param1[param1a][param1b][param1c]...param2
Parameters: |
|
|
param1 | HDMI Output (Display) | [A - H] |
param2 | HDMI Input (Source) | [1 - 8] |
Example:
ABFGH6 routes Input 6 to Outputs A, B, F, G, and H.
Notes:
Only one source (input) can be specified at a time.
17
