EDID MANAGEMENT
Audio Channel Selection
The GefenToolBox 1:4 Splitter for HDMI with FST features a switch that will modify the supported audio formats listed in the
NOTE: This selector switch will only affect the
The GefenToolBox 1:4 Splitter for HDMI with FST can use either of the following settings for audio format support:
1.2 Channel: This setting will limit the audio formats listed in the pre- programmed EDID to 2 channel LPCM. See page 11 for a full listing of the audio formats in this mode.
To use this mode, set the Audio Selection Switch on the front panel to the 2 CH position.
This mode is useful in scenarios where all output devices/displays are HDTV only support 2 channel LPCM. This setting will ensure that all connected devices will receive and produce sound.
2.
To use this mode, set the Audio Selection Switch on the front panel to the Multi CH position.
This mode is useful in scenarios where the output devices/displays are varying devices (i.e. HDTV display and audio receivers). Please note that sound may not be heard from all output devices/displays if a shared common audio format is not used by the source device.
9
