CONNECTING AND OPERATING THE
COMPOSITE & S-VIDEO TO HDMI SCALER
How to Connect the Composite & S-Video To HDMI Scaler
1.Connect the composite or s-video source to the scaler using user supplied cables.
2.Connect the audio source (digital or analog) to the scaler using user supplied cables.
NOTE: The Composite & S-video to HDMI Scaler will cross convert between some digital and audio formats. All audio outputs (HDMI, digital TOSLINK, and analog stereo mini-jack) will be active. Composite & S-video to HDMI Scaler will not, however, down-mix multi-channel audio formats to 2 channel analog stereo. Please see the chart below to see if audio will be heard out of a particular output based on the audio input format.
| INPUT ► | TOSLINK | TOSLINK | ANALOG |
| OUTPUT ▼ | 2 CHANNEL | DOLBY DIGITAL | STEREO |
| LPCM | & DTS | 2 CHANNEL |
| HDMI | YES | YES | YES |
| | | | |
| TOSLINK | YES | YES | YES |
| | | | |
| ANALOG | | | |
| STEREO | YES | NO | YES |
| MINI-JACK | | | |
3.Connect the HDMI display to the scaler using a user supplied HDMI cable.
4.Connect the desired audio output to the desired audio device using user supplied cables.
5.Connect the included 5V DC power supply to the scaler.
NOTE: Once the unit is connected and powered, the displays native resolution will be detected and set as the output on the Composite & S-video to HDMI Scaler.
OPERATING THE COMPOSITE & S-VIDEO TO HDMI SCALER
Both the Composite and S-Video inputs can be connected at the same time but only one source can be viewed at one time. To switch between the Composite and S-Video inputs, press the - button located on the front panel of the unit.
The Composite & S-video to HDMI Scaler has a built in GUI for navigating the various functions. The GUI is navigated by the front panel buttons or the optional GTV-SR-IR remote control (sold separately).
