INTRODUCTION:

Congratulations on purchasing a GEMINI CDJ-15XCD Player. This state of the art professional CD player is backed by a three year warranty, excluding lasers. One year warranty on CD lasers. Prior to use, we suggest that you carefully read all the instructions.

FEATURES:

Instant start

1-Bit linear 8 times oversampling

Precise frame accurate cue searching

± 16% Variable pitch with ON/OFF button

LCD display

Three time display modes

Single auto-cue/continuous play modes

Forward & reverse stutter

Translucent window

CAUTIONS:

1.Do not use this CD Player at temperatures below 41°F/5°C or higher than 95°F/35°C.

2.The apparatus should not be exposed to dripping or splashing, and no objects filled with liquids such as vases should be placed on the apparatus.

3.Place the unit in a clean and dry location.

4.Do not place the unit in an unstable location.

5.When disconnecting the power cord from an AC outlet, always grasp it by the plug. Never pull the power cord.

6.To prevent electric shock, do not remove the cover or the bottom screws. There are no user serviceable parts inside. Please refer servicing to a qualified technician.

7.Do not use chemical solvents to clean the unit.

8.Keep the laser pickup clean by keeping the tray closed.

9.Keep this manual in a safe place for future reference.

SAFETY CERTIFICATIONS:

Laser Diode Properties

Material: Ga - Al - As

Wavelength: 755 - 815 nm (25° C)

Laser Output: Continuous Wave, max. 0.5mW

LINE VOLTAGE SELECTION:

Model CDJ-15Xis a dual voltage unit. It will operate at 115 or 230 volts. To set the proper voltage follow these steps:

1.Place the head of a screw driver in the center of the VOLTAGE SELECTOR SLIDE (3) found on the rear panel.

2.Slide the switch left for 115 volts or push the switch right for 230 volts.

3.Do not force or twist the switch. Excessive force may cause damage. If the switch does not move smoothly, contact a qualified technician.

CONNECTIONS:

1.Plug one end of a set of RCA connectors into each of the LINE OUTPUT (1) jacks.

2.Plug the other end of the RCA connectors into any available line level input jacks on your mixer. If you are playing the CDJ-15Xthrough a receiver, you can plug the RCA connectors into the CD or AUX input jacks on your receiver. If there are no CD or AUX inputs, use any line level (not phono) inputs.

FUNCTION DESCRIPTIONS:

POWER SWITCH: After making sure that the VOLTAGE SELECTOR SLIDE (3), found on the rear panel, is properly set, plug the unit in and press the POWER (2) switch. The unit will turn on. Pushing the POWER

(2)switch a second time will turn the unit off.

DISC TRAY: The DISC TRAY (10) is where the CD is held. Pressing the disc tray OPEN (16) button will open the tray.

OPEN BUTTON: Press the OPEN (16) button to open the DISC TRAY (10).

DISPLAY: The DISPLAY (4) shows the track numbers, play mode, pause mode, and 3 different time displays. These time displays are time elapsed on the track, time remaining on the disc and time remaining on the track.

PLAYBACK DISPLAY: The PLAYBACK DISPLAY (5) displays the time remaining to play and flashes slowly when the track has 30 seconds left. The PLAYBACK DISPLAY (5) flashes quickly when the track has 15 seconds left.

PLAY/PAUSE : Each press of the PLAY/PAUSE (9) button causes the operation to change from play to pause or from pause back to play. See the CUE INSTRUCTIONS section for more information.

TRACK SKIP : The TRACK SKIP (6) buttons let you select the

track to play.

SEARCH BUTTONS : The SEARCH (7) buttons are used to move foward or reverse while in play mode. The SEARCH (7) buttons are also used to accurately position the disc at the point where you wish the track to start playing. This position on the track is memorized as the cue point. See the CUE INSTRUCTIONS section for more info.

STOP : The STOP (11) button will end the playing of the CD.

TIME: The TIME (12) button switches the time display between the three available choices listed under DISPLAY.

CUE: With the unit in the play mode, and after memorizing the cue point, pressing the CUE (8) button will cause the CD player to enter the pause mode at the memorized cue point. Holding down the cue button changes the cue function to preview (allowing you to hear the music play from the cue point) and releasing the cue button returns you to the preset cue point. If a cue point is not memorized, pressing the CUE (8) button will cause the unit to return to the beginning of that track.

PITCH: Pushing the PITCH BUTTON (14) activates the pitch section of the unit. The pitch of the CD will change according to the position of the PITCH CONTROL (15).

SINGLE-AUTO CUE/CONTINUOUS: Pressing the SINGLE-AUTO CUE/CONTINUOUS (13) button activates the AUTO CUE FUNCTION. The AUTO CUE FUNCTION causes the unit to pause at the beginning of music of the following track and allows you to start play immediately from the start of music without any blank space (which exists at the beginning of every track). Pressing the SINGLE-AUTO CUE/CONTINU OUS (13) button a second time activates the CONTINUOUS function causing the unit to play continuously (after the last track, the unit will return to the first track of the disc and continue to play). Pressing the SINGLE-AUTO CUE/CONTINUOUS (13) button a third time deactivates the CONTINUOUS function.

(4)

Page 4
Image 4
Gemini CDJ-15X Introduction, Features, Safety Certifications, Line Voltage Selection, Connections, Function Descriptions

CDJ-15X specifications

The Gemini CDJ-15X is a cutting-edge digital media player designed for DJs and music enthusiasts looking to elevate their performance levels. This versatile device stands out in the market due to its robust features, user-friendly interface, and innovative technologies.

One of the key characteristics of the Gemini CDJ-15X is its ability to play a wide range of audio formats, including MP3, WAV, and AAC, ensuring that DJs can seamlessly mix their favorite tracks without any compatibility concerns. The player is equipped with a high-resolution LCD screen that provides essential information, such as track title, artist, BPM, and waveform display, enabling DJs to make informed decisions during their sets.

The CDJ-15X features a responsive jog wheel that allows for precise scratching and track manipulation. This jog wheel includes touch-sensitive technology, which gives DJs the ability to control music playback with finesse. It also incorporates a pitch fader that enables fine-tuning of tempo adjustments, helping DJs maintain beat alignment across tracks.

One of the standout technologies in the Gemini CDJ-15X is its built-in USB port, allowing users to connect flash drives and external storage devices. This feature not only enhances convenience but also expands the storage capacity for performances, giving DJs access to thousands of tracks without being limited to CDs or internal memory. The Auto BPM feature further simplifies the mixing process by automatically detecting the tempo of incoming tracks, making it easier to transition between songs.

In terms of connectivity, the CDJ-15X is equipped with multiple output options, including RCA outputs and a headphone jack for pre-listening. This versatility allows DJs to connect the device to various sound systems and ensures a smooth performance setup.

The sturdy build quality of the Gemini CDJ-15X is another notable characteristic, providing durability essential for life on the road. Its sleek and modern design makes it an attractive addition to any DJ setup; it combines functionality with aesthetics.

Finally, the Gemini CDJ-15X is designed with an emphasis on portability. Its lightweight form factor and ergonomic layout make it easy for DJs to transport and handle during gigs. Overall, the Gemini CDJ-15X is a powerful tool that incorporates advanced features, allowing DJs to elevate their performance and engage audiences like never before.