Generac 005518-1, 005520-1, 005522-1 Features, Standby Generator - 8 kW - 10 kW - 14 kW, Engine

FEATURES

	•Generac (OHVI) Design
	•”Spiny-lok” cast iron cylinder walls
ENGINE	•Electronic ignition/spark advance
	•Full pressure lubrication system
	•Low oil pressure shutdown system
	•High temperature shutdown
	•Revolving field
GENERATOR	•Skewed rotor (8 & 10 kW)
	•Automatic voltage regulation
	Skewed stator (14 kW)
	•Displaced phase excitation
TRANSFER SWITCH	•UL 2200 Listed
	Sold separately
	•Manual/Auto/Off switch
	•Utility voltage sensing
CONTROLS	•Utility interrupt delay
	•Engine warm-up
	•Engine cool-down
	•Seven day exerciser
	•Timed Trickle Battery charger
	•Main Line Circuit Breaker
	•Electronic governor (10 & 14 kW)
	•Weather protective enclosure
UNIT	•Enclosed critical grade muffler
	•Small, compact, attractive
INSTALLATION SYSTEM	•1’ Flexible Fuel Line Connector
	•Composite Mounting Pad

Standby Generator - 8 kW - 10 kW - 14 kW

Maximizes engine “breathing” for increased fuel efficiency. Plateau honed cylinder walls and plasma moly rings help engine run cooler, reducing oil consumption. Because heat is the primary cause of engine wear, the OHVI has a significantly longer life than competitive engines.

Rigid construction and added durability provide long engine life.

These features combine to assure smooth, quick starting every time.

Superior lubrication to all vital bearings means better performance, less maintenance and significantly longer engine life. Now featuring a 2 year/200 hour oil change interval.

Superior shutdown protection prevents catastrophic engine damage due to low oil.

Prevents damage due to overheating.

Allows for smaller, light weight unit that operates 25% more efficiently than a revolving armature generator.

Produces a smooth output waveform for compatibility with electronic equipment.

Maximizes motor starting capability.

Regulates the output voltage to ±2% prevents damaging voltage spikes.

For your safety

Selects the operating mode.

Constantly monitors utility voltage, setpoints 65% dropout, 75% pick-up, of standard voltage.

Prevents nuisance start-ups of the engine, setpoint approximately 10 seconds.

Ensures engine is ready to assume the load, setpoint approximately 10 seconds.

Allows engine to cool prior to shutdown, setpoint approximately 1 minute.

Operates engine to prevent oil seal drying and damage between power outages.

Maintains battery charge level to insure starting.

Protects generator from overload.

Maintains constant 60 Hz frequency.

Ensures protection against mother nature. Hinged key locking roof panel for security. Lift-out front for easy access to all routine maintenance items. Electrostatically applied textured epoxy paint for added durability.

Quiet, critical grade muffler is mounted inside the unit to prevent injuries.

Makes for an easy, eye appealing installation.

Easy Installation