Generac 04673-2, 04675-3, 04674-2 owner manual Service Schedule

Section 4 — Maintenance

Generac Air-cooled 7 kW, 12 kW and 15 kW Generators

4.13 SERVICE SCHEDULE

ATTENTION: It is recommended that all service work be performed by the nearest Generac Authorized Dealer.

SYSTEM/COMPONENT			PROCEDURE		FREQUENCY
X = Action	Inspect		Change	Clean	W = Weekly
R = Replace as Necessary					M = Monthly
* = Notify Dealer					Y = Yearly
if Repair is Needed.
FUEL
Fuel lines and connections*	X				M
LUBRICATION
Oil level	X				M
Oil			X		AFTER BREAK-IN,
					AND Y
Oil filter			X		AFTER BREAK-IN,
					AND Y
COOLING
Enclosure louvers	X			X	W
BATTERY
Remove corrosion,	X			X	M
ensure dryness
Clean and tighten	X			X	M
battery terminals
Check charge state	X		R		EVERY 6 M
Electrolyte level	X		R		EVERY 6 M
(unsealed batteries only)*
ENGINE AND MOUNTING
Air cleaner	X		R		Y
Spark plug(s)	X		R		Y
GENERAL CONDITION
Vibration, Noise, Leakage,	X				M
Temperature*
COMPLETE TUNE-UP*	TO BE COMPLETED BY A GENERAC				Y
		AUTHORIZED DEALER

22 Generac® Power Systems, Inc.