Gigaset 4010 Classic, GBR, A31008-G4010-J101-1-7619

mobilt_an.fm

11.07.01

Registering and de-registering handsets

Press keys:

Manual registration

Gigaset 4000 handsets at the Gigaset 4000 base station

If a handset has already been registered at a different base station, you must now register it at your base sta- tion. The Gigaset 4000 Classic handset cannot be reg- istered at more than one Gigaset 4010Classic base sta- tion at one time.

OOOOOOOOOOOO0(18 ￿OOOOOOO OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO5(*,67(5￿+6 ￿OOOOOOO￿

￿￿￿OOOOOOO

Step 1:

Open the menu.

Select the menu item and confirm, 3,1￿￿￿￿￿ is dis- played.

Enter the 4-digit system PIN (factory setting: 0000) and confirm.

After entering the system PIN, 5(*,67(5￿+6 flashes in the display.

Step 2:

Underside of the base

station￿￿￿H Press the key on the underside of the base station briefly (approx. 5 secs). A signal tone is generated at the base station. The next unassigned internal number (1 – 6) is automatically assigned to the handset.

If all numbers are assigned, the internal number 6 is re- assigned. The handset which was registered under number 6 is then deregistered.

After about a minute the internal number of the hand- set is shown in the left-hand corner of the display (e.g. “2“).

28

Page 32
Image 32
Generac 4010 operating instructions Step Underside of the base