Generac 4010 operating instructions Appendix, Maintenance, Troubleshooting

Gigaset 4010 Classic, GBR, A31008-G4010-J101-1-7619 anha.fm 12.07.01

Appendix

Appendix

Maintenance

Simply wipe the base station and handset with a damp cloth or an antistatic wipe. Never use a dry cloth as this can cause static dis- charge!

Troubleshooting

If your telephone does not behave the way you want it to, first try to solve the problem using the following list.

Fault	Possible cause			Solution
No	Handset not			Hold down the end call
display.	activated			key￿￿for 1 second
	Batteries empty			Charge or replace the
				batteries (see page 7).
No reaction to key-	Keypad protection			Hold down the 4￿key
stroke.	activated			for 1 second
No radio connec-	Handset outside the			Move closer to the base
tion to the base	base station range.			station.
station – all dis-
plays flashing.
	Handset not			Register the handset
	registered			(see page 27).
	Base station not acti-			Check the connector at
	vated			the base station (see
				page 6).
Handset that is in	Line seized by a sec-			Maximum charging pow-
the base station is	ond handset for a			er is only possible while
not charging.	long period.			nobody is making calls.
Handset/base sta-	Ringer off			Activate the ringer
tion does not ring.				(see page 36/page 40).
Your caller on the	The		key was	Press			￿to
		,17			*2￿%$&.	2.
telephone cannot	pressed – the micro-			re-activate the micro-
hear you.	phone is “muted”.			phone.
The incoming call	The telephone			Callers must permit the
number is not dis-	number transmis-			transmission of their tele-
played although	sion			phone numbers at their
CLIP is set.	is blocked.			network providers.

43