Standby Generator Sets
General Information
IDENTIFICATION RECORD
DATA LABEL
Every generator set has a DATA LABEL that contains important information pertinent to the generator. The data label, which can be found attached to the gen- erator’s lower connection box, lists the unit’s serial number and its rated voltage, amps, wattage capacity, phase, frequency, rpm, power factor, etc.
|
| GENERATOR SET DATA | MADE IN USA |
MODEL |
| SERIAL |
|
RATED KW |
| RATED KVA | PHASE |
RATED VOLTAGE | RATED AMPS | ||
POWER FACTOR | HERTZ | ALT RPM | |
ENGINE RPM | PRODUCTION DATE |
| |
ALTERNATOR SUBTRANSIENT REACTANCE |
| ||
ALTERNATOR TRANSIENT REACTANCE |
| ||
CLASS | ROTOR | STATOR WINDING INSULATION AT 25°C AMBIENT | |
Identification Code
Use this code to obtain important information about the generator. For example, if the code is:
M Q T 1 0 0 5 4 A N S N A
M— Designates generators capable of paralleling. NOTE: Only 100kW and 150kW, 6.8L units are currently available for this configura- tion.
QT — Quiet Test Generator Series 100 — kw Rating
5.4— Engine Size in Liters
A— Voltage Code: A = 120/240,
N— Fuel: N = Natural Gas; V = Vapor Propane S — Enclosure Material: A = Aluminum; S
=Steel (Corrosion Resistant Aluminum Enclosure Material, Steel is Standard)
GENERAC POWER SYSTEMS, INC.
WAUKESHA, WI
NOTE:
For actual information related to this particular model, please refer to the Manual Drawing Listing located at the end of this manual, or to the data label affixed to the unit.
Generator Model and Serial Number
This number is the key to numerous engineering and manufacturing details pertaining to your unit. Always supply this number when requesting service, order- ing parts or seeking information.
N— Emission Equipment: N = No Equipment; Y = Catalytic Converter and Air/Fuel Ratio Controller
A— Industrial Dealer Product
Voltage Codes
The identification code letter following the unit’s engine size is the generator’s “voltage code.”
Groups and Assembly Numbers
The manual drawing listing lists the groups and cor- responding assembly numbers for each unit. The assembly numbers refer to exploded view drawing numbers that are applicable to the specific generator model. These drawings are located in the back half of this manual.
04/06 C .Rev Identy001
