Genesis Advanced Technologies 55274 manual Operating Instructions, Lighting, To Extinguish

					Operating Instructions
	Lighting						1) Open the lid.
	Summary lighting instructions are on the control panel.						2) Make sure all burner control knobs are turned OFF.
							(Push control knob down and turn clockwise to ensure
				DANGER			that it is in the OFF position.)
	Failure to open the lid while igniting the						WARNING: The burner control knobs must be in the
							OFF position before turning on the liquid propane
	barbecue’s burners, or not waiting 5 minutes
							cylinder tank valve. If they are not in the OFF
	to allow the gas to clear if the barbecue does						position, when you turn on the LP cylinder valve,
	not light, may result in an explosive flame-up						the “excess gas flow control” feature will activate,
	which can cause serious bodily injury or						limiting the flow of gas from the LP cylinder. If this
	death.						should occur, turn OFF the LP cylinder valve and
							burner control knobs. Then start over.
	Crossover® Ignition System
							DANGER:
	Note - The Crossover® ignition system ignites the Front						When the “excess gas flow control” feature is
	burner with a spark from the igniter electrode inside the						activated, a small amount of gas I still flowing to the
	Gas Catcher™ ignition chamber. You generate the energy						burners. After turning OFF the cylinder knobs, wait at
	for the spark by pushing the Crossover® ignition button						least 5 minutes for the gas to clear before attempting
	until it clicks.						to light the barbecue. Failure to do so may result in an
	WARNING: Check hose before each use of						explosive flame-up, which can cause serious bodily
	barbecue for nicks, cracking, abrasions or cuts. If						injury or death.
	the hose is found to be damaged in any way, do not
							3) Turn the cylinder on by turning the cylinder valve
	use the barbecue. Replace using only Weber
							counterclockwise.
	authorized replacement hose. Contact the
							WARNING: Do not lean over the open barbecue.
	Customer Service Representative in your region
							Keep your face and body at least one foot away
	using the contact information sheet provided with
							from the matchlight hole when lighting the
	your manual.
							barbecue.
							4) Push Front burner control knob down and turn to
		1					START/HI.
							5) Push the Crossover® ignition button several times, so it
							clicks each time.
							6) Check that the burner is lit by looking through the
							matchlight hole on the front of the cooking box. You
		2					should see a flame.
							WARNING: If the burner does not light, turn the
						7	Front burner control knob to OFF and wait 5
							minutes to let the gas clear before you try again or
						5	try to light with a match.
						3	7) After the FRONT burner is lit you can turn on the other
							burner or burners.
			6				Note - Always light the FRONT burner first. The
							other burner or burners ignite from the FRONT
							burner.
4

*The grill illustrated may have slight differences than the model purchased.

To Extinguish

Push down and turn each burner control knob clockwise to the OFF position. Turn gas supply OFF at the source.

D200_LP.b

D-1