English
OPERATION
IMPORTANT: Before each use of the bench grinder, inspect its general condition. Check for loose screws, damaged electrical wiring, cracked, chipped, or damaged wheels and misalignment or binding of the moving parts. If bench or pedestal mounted, check that all fasteners are in place and tight.
CAUTION: Keep your bench grinder clean by removing dust from working parts, the lower portion of the wheel guard assembly, and the work area surrounding the grinder.
ON/OFF Switch (FIG 8)
The Switch (1) is located on the front of the grinder.
To turn the grinder "ON", push the right hand portion of the switch, with the white dot, down.
To turn the grinder "OFF", push the left hand portion of the switch down.
Work Light
1
FIG 8
Your grinder is equipped with two flexible work lights for better visibility in the work area during operation. When the tool is turned on, the lights will turn on automatically and stay on until the tool is turned off.
WARNING: Always be sure that the tool is switched off and unplugged from the power source before adjusting, adding accessories, or checking a function on the tool.
Grinding Wheels
For best grinding results and maintaining good balance, always keep the wheel(s) properly dressed. Never force a work piece against a cold wheel but use light pressure until the wheel becomes warm. We strongly recommend using only balanced wheels on these grinders. Balanced wheels will add years of life to grinder bearings and arbor shaft, and eliminate the most common cause of vibration, which will yield more accurate work.
Dressing a Grinding Wheel
When the grinding wheel is out of balance, worn out of shape, or dull, loaded and glazed, it must be trued and dressed. Truing or dressing the wheel is best done using a
BASIC GRINDER OPERATIONS
WARNING: Always wear safety goggles or safety glasses with side shields during operation of any power tool. If the operation is dusty, wear appropriate protective mask.
Your Bench Grinder is equipped with one coarse grinding wheel and one medium grinding wheel. It is the ideal tool for sharpening tools such as wood chisels, cold chisels, planer blades, scissors, lawn mower blades, etc.
8" Bench Grinder with Lights
Operator’s Manual | GBG800L |
