Genesis Advanced Technologies GENESIS 5.3 ~ Ä ë ç ä ì í É = Ñ á Ç É ä á í ó, Low Pass filter

Models: GENESIS 5.3

1 24
Download 24 pages 46.18 Kb
Page 10
Image 10
Low Pass filter

~ Ä ë ç ä ì í É = Ñ á Ç É ä á í ó

music accompaniment should sound as if it were cut from one cloth, not separate.

If the voice sounds “thin” or does not have enough “chest” to its sound, turn the woofers amplifier’s gain up till it does. If you find that turning the volume up creates too much low bass and makes the speakers sound boomy, you will then need to work on the low pass filter.

Low Pass filter

This control will lower the upper-frequency cut-off point of the woofer. It does not affect the lower-frequency cut-off point of the mid- bass couplers.

Turning the low pass filter up to a higher number will extend the upper bass regions at the crossover point between the woofers and the mid-bass couplers without affecting the low bass level. Some rooms may require you to set the low pass filter up to 130Hz, while others will require you to lower it down to 80Hz.

Do not be afraid to increase this control to give the sound more body or to make the balance “warmer”. There is a balance between the setting of the bass gain control and the low-pass control. The trick is to find this balance.

A general rule of the thumb is to turn the low-pass filter as far clockwise of the 12 o’clock mark as the bass gain control is anti- clockwise of the 12 o’clock mark. For example, if the bass gain is at 10 o’clock, the low-pass should be at 2 o’clock. If the bass gain is at 1 o’clock, the low pass should be at 11 o’clock.

Next, set the woofers using more than just a voice. Select some music that you know to have good deep bass. Set the gain on the woofers for a natural and powerful bass sound. Use a symphonic piece of music if you can, or use a natural bass instrument for your guide. Try to make it sound real. You may have to return to the vocal to make sure you have not gone too far in one direction or the other.

At this point, if there is not enough mid bass, turn the low pass number to a higher position or, alternately, position the main speakers closer together in order to achieve better mid bass coupling between the main speakers. If it sounds too “fat” turn the low pass control down or adjust the volume.

Genesis 5.3 Owners Manual Ver 2.2

9

Page 10
Image 10
Genesis Advanced Technologies GENESIS 5.3 manual ~ Ä ë ç ä ì í É = Ñ á Ç É ä á í ó, Low Pass filter