Operator's Manual | Second Edition • Third Printing |
|
|
|
|
FUNCTION TESTS
Test the Steering
Note: When performing the steer and drive function tests, stand in the platform facing the steer end of the machine.
24Press and hold the function enable switch on the control handle.
25Depress the thumb rocker switch on top of the control handle in the direction identified by the blue triangle on the control panel.
Result: The steer wheels should turn in the direction that the blue triangle points on the control panel.
26Depress the thumb rocker switch in the direction identified by the yellow triangle on the control panel.
Result: The steer wheels should turn in the direction that the yellow triangle points on the control panel.
Test Drive and Braking
27Press and hold the function enable switch on the control handle.
28Slowly move the control handle in the direction indicated by the blue arrow on the control panel until the machine begins to move, then return the handle to the center position.
Result: The machine should move in the direction that the blue arrow points on the control panel, then come to an abrupt stop.
29Press and hold the function enable switch on the control handle.
30Slowly move the control handle in the direction indicated by the yellow arrow on the control panel until the machine begins to move, then return the handle to the center position.
Result: The machine should move in the direction that the yellow arrow points on the control panel, then come to an abrupt stop.
Note: The brakes must be able to hold the machine on any slope it is able to climb.
Test Limited Drive Speed
31Push and hold the lift function enable button. Raise the platform approximately 1.83 m from the ground.
32Press and hold the function enable switch on the control handle.
33Slowly move the control handle to the full drive position.
Result: The maximum achievable drive speed with the platform raised should not exceed 31 cm/s.
If the drive speed with the platform raised exceeds 31 cm/s, immediately tag and remove the machine from service.
18 | Genie | Part No.82828 |
