Second Edition • Third Printing

Operator's Manual

 

 

 

 

Transport and Lifting Instructions

Observe and Obey:

Common sense and planning must be applied to control the movement of the machine when lifting it with a crane.

The transport vehicle must be parked on a level surface.

The transport vehicle must be secured to prevent rolling while the machine is being loaded.

Be sure the vehicle capacity, loading surfaces and chains or straps are sufficient to withstand the machine weight. See the serial plate for the machine weight.

The machine must be on a level surface or secured before releasing the brakes.

Free-wheel Configuration for Winching

Chock the wheels to prevent the machine from rolling.

2WD models: Release the non-steer wheel brakes by turning over the torque hub disconnect caps (see below).

4WD models: Release the wheel brakes by turning over all four torque hub disconnect caps (see below).

Be sure the winch line is properly secured to the drive chassis tie points and the path is clear of all obstructions.

Reverse the procedures described to re-engage the brakes.

Note: The pump free-wheel valve should always remain closed.

Disengage

Position

Engage Position

Part No.82828

Genie GS-3384 & GS-3390 & GS-4390 & GS-5390

25

Page 27
Image 27
Genie GS-3384, GS-3390, GS-4390, GS-5390 manual Transport and Lifting Instructions, Free-wheel Configuration for Winching