Manuals / Genie / Lawn and Garden / Utility Vehicle

Genie TMZ-34, TMZ-19 manual Battery and Charger Instructions Observe and Obey, To Charge Battery

Models: TMZ-34, TMZ-19

1 37
Download 37 pages 28.85 Kb
Page 33
Image 33

Fourth Edition • First Printing

Operator's Manual

 

 

 

 

 

 

Battery and Charger Instructions

Observe and Obey:

Do not use external charger or booster battery.

Charge battery in a well-ventilated area.

Use proper AC input voltage for charging as indicated on charger.

Use only Genie authorized battery and charger.

OPERATING INSTRUCTIONS

Dry Battery Filling and

Charging Instructions

1Remove the battery vent caps and permanently remove the plastic seal from the battery vent openings.

2Fill each cell with battery acid (electrolyte) until the level is sufficient to cover the plates.

Do not fill to maximum level until the battery charge cycle is complete. Overfilling can cause the battery acid to overflow during charging. Neutralize battery acid spills with baking soda and water.

3Install the battery vent caps.

4Charge the battery.

5Check the battery acid level when the charging cycle is complete. Replenish with distilled water to the bottom of the fill tube. Do not overfill.

To Charge Battery

1Be sure the batteries are connected before charging the batteries.

2Open the turntable covers. The covers should remain open for the entire charging cycle.

3Remove the battery vent caps and check the battery acid level. If necessary, add only enough distilled water to cover the plates. Do not overfill prior to the charge cycle.

4Replace the battery vent caps.

5Connect the battery charger to a grounded AC circuit.

6Turn the battery charger on.

7The charger will indicate when the battery is fully charged.

8Check the battery acid level when the charging cycle is complete. Replenish with distilled water to the bottom of the fill tube. Do not overfill.

Voltage Conversion

Some battery chargers are equipped with a multifunction fuse, which enables the operator to switch between 110-120 volts and 220-240 volts.

1 Locate the fuse drawer module on the front of the battery charger.

2To change voltage, pull the fuse drawer out, flip it over so the desired voltage range reads right side up, and return the drawer to the slot.

3Check that the triangle next to the desired voltage range points to the triangle printed on

the lip of the module.

Part No. 97866

GenieTMZ-34/19

31

Page 32 Page 34
Page 33
Image 33
Genie TMZ-34, TMZ-19 manual Battery and Charger Instructions Observe and Obey, Dry Battery Filling Charging Instructions
Page 32 Page 34

TMZ-34, TMZ-19 specifications

The Genie TMZ-34 and TMZ-19 are innovative models in the field of aerial work platforms designed for efficiency, mobility, and safety. These units reflect Genie’s commitment to providing high-quality, reliable equipment for various applications in construction, maintenance, and industrial settings.

The Genie TMZ-34 features a working height of 12.5 meters (41 feet) and a maximum outreach of 8.9 meters (29 feet). It is equipped with a proportional lift and drive system, allowing for smooth and precise operation. The platform's capacity stands at 227 kg (500 lbs), making it suitable for multiple operators or considerable materials. The TMZ-34 offers 360-degree rotation on its turntable, enhancing its versatility and maneuverability at elevated heights. Its compact design enables it to work effectively in tight spaces, making it a valuable asset for indoor applications or cramped construction sites.

On the other hand, the Genie TMZ-19 is designed for lighter tasks, with a working height of 7.8 meters (25.6 feet) and a maximum outreach of 3.7 meters (12 feet). With a platform capacity of 227 kg (500 lbs), it also accommodates multiple workers or tools. The Genie TMZ-19 boasts a lower weight, making it more portable and easier to transport between job sites.

Both models come with Genie’s advanced safety features, including automatic leveling systems, emergency descent mechanisms, and non-slip surfaces on the platforms. Additionally, they are designed with robust, durable materials that withstand heavy use.

Another significant technology incorporated in both models is the AC electric drive system, which reduces noise and emissions, aligning with environmental standards and making them suitable for indoor operations. The user-friendly controls and intuitive design also enhance operator comfort, allowing for extended periods of use without fatigue.

Overall, the Genie TMZ-34 and TMZ-19 are perfect choices for professionals seeking reliable, efficient, and safe aerial work platforms. Their advanced features, safety systems, and compact designs make them indispensable tools for a variety of tasks, from maintenance to construction, ensuring user satisfaction and improved productivity on the job.