Genie TMZ-34, TMZ-19 manual Check the Tires and Wheels, Maintenance

Fourth Edition • First Printing Operator's Manual

Check the Tires and Wheels

Bodily injury hazard. An over- inflated tire can explode and may cause death or serious injury.

Collision hazard. An excessively worn tire can cause poor handling and continued use could result in tire failure.

Tip-over hazard. Do not use temporary flat tire repair products.

Maintaining the tires and wheels in good condition is essential to safe operation and good performance. Tire and/or wheel failure could result in a machine tip-over. Component damage may also result if problems are not discovered and repaired in a timely fasion.

1Check the tire surface and sidewalls for cuts, cracks, punctures and uneven or excessive tread wear.

Result: Replace the tire if uneven or excessive tread wear is found.

Always replace the tire with specifications equal to original equipment manufacturer.

2Check each wheel for damage, bends and cracks.

Result: Replace the wheel if any damage is found.

3Check each tire with an air pressure gauge and add air as needed.

MAINTENANCE

4 Check the torque of each lug nut.

Tires and wheels - ANSI & CSA

Tire size		ST195/75D14
Lug nut torque	80 ft-lbs	108 Nm
Tire pressure (cold)	65 psi	4.5 bar
Tires and wheels - CE
Tire size		195/65R15 91T
Lug nut torque	80 ft-lbs	108 Nm
Tire pressure (cold)	44 psi	3.0 bar

Part No. 97866 GenieTMZ-34/19 17