3.1.5Using the LED Light
You can use the LED light to provide extra light when the lighting is insufficient.
To enable the LED light, do the following:
1.Press the 
button to enter the OSD menu.
2.Press the 
/
button to select Auxiliary Light and press the 
button.
3.Press the 
/
button to select On
and press the 
button.
4.Press the 
button to exit the menu.
Note:
Turn off LED lights when the battery is low.
When using LED lights for a long time, it may become hot. Take care not to touch the hot LED lights.
3.1.6Taking Snapshot
You can also use this device to take snapshots of the current scene.
From the standby screen, press the button to take a snapshot.
Note: If recording is in progress, press the 
button to stop the recording.
17
